Category: Machines

is to efficiently clean large flat paved areas like street, markets and commercial areas, industries, residential blocks etc. With help of rotating brushes & suction system on the left or right side the dirt is to be lifted off the ground and sucked through the duct through the high-pressure suction system and brushes. It should not return any dust to the environment through proper use of dust suppression system. The machine have heavy-duty diesel operated powerful auxiliary engine for rotating the vacuum blower and operating the various hydraulic systems of the unit.
Excellent performance high dust lifting capacity does not produce dust while cleaning with the help of water sprinkler system.
can work dry roads only
18500sqm.
0 to10 km.hr cleaning speed according to dust condition
One sweeping path minimum 7feet Max. 8feet
Debris hopper capacity 4 cu.m
Water tank capacity 300 liter (optional)
Advance features of
Technical Specification of
Sweeping Path |
8 Feet with duel side rotary brushes |
Sweeping Speed |
0 To 10 Km/hr Depending on road conditions |
Power Source |
76 hp. water-cooled Diesel engine with all controls on Control panel |
Diesel Consumption |
6-7 Liters/ hr. depending on engine hp. |
Wheels |
7.50*16 two numbers CEAT /MRF |
Axle |
Single axle |
Suction Blower |
High-performance multi bladed dynamically balanced vacuum fan At 2000 RMP driven with four V-Belts. Mound on two double Spherical Bearings at 2200 RPM approx. |
Suction Nozzles |
Two suction nozzles for picking the dust and other material from Road heaving remote control operated openings for large objects Capable of lifting stones up to 35 mm, leaves, sand and other Material from the road |
Sweeping Brushes |
One horizontal brush 2100mm long for wide sweeping made have Nylon bristles. Two rotary brushes 440 mm on each side made of Special steel bristles for sweeping debris along the footpath and Central verge. All Brushes are driven directly by hydraulic motors |
Debris Hopper |
Hopper capacity 4 Cu Mt., Anti Rust Paint inside the Hopper and paint outside of the machine. Unloading of waste material by hydraulically tipping controlled Form the control panel (payload depends on the material) |
Hydraulic System |
Purpose: powers hydraulic sweeping system and hopper cylinder. Reservoir capacity 55 Lt. Hydraulic pump belt driven with protection relief valve Control Valve-Solenoid Operated form the control panel. Filtration system 10 micron |
Water Sprinkle System |
Provided at the rear of the machine to sprinkle water on the swept path. Water tank capacity 300Liters. |
Air Filter System |
PLC Controlled air pulse jet filter cleaning system |
Sweeping Controls |
Auxiliary Engine, all sweeping and unloading controls are Provided on the control panel. Brushes up down and on off is controlled from the tractor with the help of a remote control |
Transmission |
Machine can be trailed with any tractor |
Turning Radius |
24 feet. With tractor |
Wondering Hose |
A 12 feet long flexible suction hose 5inch. Diameter with the nozzle is Provided at the rear of the machine for manual cleaning in areas where the machine cannot reach.(This wondering hose can be extended up to 50 feet or so.) This wondering hose is capable of sucking loose material from plant roots |

- Working Width : 1800 MM
- Main Frame : Made of Channel and main Body M.S. Sheet
- Drive : Tractor P.T.O. At Rear
- Attachment : Three-Point Linkage System at the rear of the tractor
- Wheels : Two 12″ heavy duty pneumatic & one Solid Rubber Wheels
- Dust Collector : Attached with the main Frame, with easy unloading Mechanism
- Main Brush : Made of Special Steel and Nylon Bristles
- Brush Drive: Tractor P.T.O. Through Angle Gear
- Dust Prevention : Dust Preventing Rubber Flaps on each side of Main Body
LCV 400 is to efficiently clean large flat paved areas like street, markets and commercial areas, industries, residential blocks etc.
With help of rotating brushes & suction system on the left or right side the dirt is to be lifted off the ground and sucked through the
duct through the high-pressure suction system and brushes. It should not return any dust to the environment through proper use of dust
suppression system. The machine have heavy-duty diesel operated powerful auxiliary engine for rotating the vacuum blower and operating
the various hydraulic systems of the unit.
Excellent performance high dust lifting capacity does not produce dust while cleaning with the help of water sprinkler system.
can work wet and dry roads
22500sqm.
0 to 8 km.hr cleaning speed according to dust condition
One sweeping path minimum 7feet MAXSWEEP® 2850 MM (9 feet optional)
Debris hopper capacity 4 cu.m
High-Pressure hand spray gun (optional)
Water tank capacity 300 liters (optional)
CCD cameras, at the rear of the machine (optional)
For queries contact us on whatsapp




One sweeping path minimum 7feet maximum 8 (9 feet optional)
Debris hopper capacity 5 ton (optional)
High-Pressure hand spray gun (optional)
Water tank capacity 400 liters (optional)
CCD cameras, at the rear of the machine (optional)
Technical Specifications of
DEBRIS HOPPER CAPACITY |
Volumetric Capacity 5 CU MT |
SWEEPING SPEED |
Sweeping mode speed 1 -8 km/ hr Depending upon road and dust conditions |
CONSTRUCTION |
Machine incorporated of Debris hopper and Engine compartment mounted on heavy duty Sub chassis further mounted on the base of suitable truck chassis |
DEBRIS HOPPER |
Made of mild steel sheets for lightweight and strong structure heaving volumetric Capacity of 5CU MT. Hopper unloading / tipping by Hydraulic cylinder through the rear door |
ENGINE COMPARTMENT |
Soundproofed engine compartment with ant vibration dampers heaving Engine, Vacuum Fan, All hydraulics and Electrical systems for different operations of machine ensuring lower noise Levels and easy accessibility to all components for servicing |
AUXILIARY ENGINE |
Heavy Duty Industrial water cooled Diesel engine Max B.H.P.96 H.P Turbo Charge With all controls on operator panel Inside operator Cabin, Make: Kirloskar / Leyland |
SUCTION FAN |
High Efficiency dynamically balanced multi-bladed Vacuum Fan driven by Auxiliary engine Through V-Belts for ensuring sufficient vacuum power for the sweeping system and lower noise levels |
SWEEPING HEAD |
Sweeping head with suction nozzles and sweeping brushes mounted on heavy duty caster wheels Fixed on free-floating suspension system for ensuring uniform sweeping along the width of machine On all kind of smooth and bumpy roads |
SWEEPING BRUSHES |
One horizontal roller brush with special bristles driven by hydraulic motor 2000 MM (long)
Two side rotary brushes with special bristles driven by hydraulic motor 500 MM (Diameter) |
HYDRAULIC SYSTEM |
Purpose to power sweeping brushes and all hydraulic actuators the hydraulic pump is driven by an Auxiliary engine with Reservoir tank capacity 60 Liters High efficiency filtration system and circuit protection valves for longer life Electro solenoid valve for actuating different functions from operator panel inside cabin |
HCV 600 is to efficiently clean large flat paved areas like street, markets and commercial areas, industries, residential blocks etc.
With help of rotating brushes & suction system on the left or right side the dirt is to be lifted off the ground and sucked through the
duct through high pressure suction system and brushes. It should not return any dust to the environment through proper use of dust
suppression system. The machine have heavy duty diesel operated powerful auxiliary engine for rotating the vacuum blower and operating
the various hydraulic systems of unit.
Excellent performance high dust lifting capacity does not produce dust while cleaning with the help of water sprinkler system.
can work wet and dry roads
22500sqm.
0 to10 km.hr cleaning speed according to dust condition
One sweeping path minimum 7feet MAXSWEEP® 2850 MM (9 feet optional)
Debris hopper capacity 6 cu.m
High Pressure hand spray gun (optional)
Water tank capacity 500 liter (optional)
CCD cameras, at rear of the machine (optional)
Technical Specifications of
SUITABLE TRUCK CAB CHASSIS |
TATA, ASHOK LEYLAND, EICHER,BHARAT BENZ |
SWEEPING CAPACITY |
With One Horizontal Brush 1900 MM With One Horizontal and Two Side Brushes 2850 MM |
DEBRIS HOPPER CAPACITY |
Volumetric Capacity 6 CU MT |
SWEEPING SPEED |
Sweeping speed 1 -10 km / hr. Depending upon road and dust conditions |
CONSTRUCTION |
Machine incorporated of Debris hopper and Engine compartment mounted on heavy duty Sub chassis further mounted on base of suitable truck chassis |
DEBRIS HOPPER |
Made of reinforced mild steel sheet for light weight and strong structure heaving volumetric Capacity of 6 CU MT. Hopper unloading / tipping by Hydraulic cylinder through rear door |
ENGINE COMPARTMENT |
Sound proofed engine compartment with anti-vibration dampers heaving Engine, Vacuum Fan, All hydraulics and Electrical systems for different operations of machine ensuring lower noise Levels and easy accessibility to all components for servicing |
AUXILIARY ENGINE |
Heavy Duty Industrial water cooled Diesel engine Max B.H.P.101TURBO BS3With all controls on operator panel Inside operator Cabin, Leyland |
SUCTION FAN |
High Efficiency dynamically balanced multi bladed Vacuum Fan driven by Auxiliary engine Through V-Belts for ensuing sufficient vacuum power for sweeping system and lower noise levels |
SWEEPING HEAD |
Sweeping head with suction nozzles and sweeping brushes mounted on heavy duty caster wheels Fixed on free floating suspension system for ensuring uniform sweeping along width of machine On all kind of smooth and bumpy roads |
SWEEPING BRUSHES |
One horizontal roller brush with special bristles driven by hydraulic motor 2200 MM (long) Two side rotary brushes with special bristles driven by hydraulic motor 500 MM (Diameter) |
HYDRAULIC SYSTEM |
Purpose to power sweeping brushes and all hydraulic actuators Hydraulic pump driven by Auxiliary engine with Reservoir tank capacity 60 Liters High efficiency filtration system and circuit protection valves for longer life Electro solenoid valve for actuating different functions from operator panel inside cabin |